These Stainless Steel Drawer Guinea Pig Cages are available in two types: Type 1 has a solid bottom and Type 2 has a solid bottom with a slide-out litter tray. Both types of cages feature die-formed one-piece wrappers, consisting of sides and bottoms. The back panel has square holes in the upper portion and can be punched to accommodate an automatic watering system. The front panel has square perforated holes in the upper portion. The front panel also has a 5" wide by 3" high cardholder and a provision for a sipper tube. The cages are equipped with an externally mounted "J"- type feeder.

The Stainless Steel Angular Rack for Drawer Guinea Pig Cages is fabricated from die-formed angles and channels. The angle uprights' lower ends have caster couplers. The angle uprights, angle crossmembers, and channel crossmembers are butted at all joints and welded for strength.

Each cage is held securely in place by a pair of full-length cage runners that are welded to the rack uprights. A removable solid stainless steel panel acts as the top for the cages in the top tier. In addition, the rack is designed so that the bottom of the upper cage becomes the top of the lower cage.

The rack has a glass beaded satin finish, removing any discoloration. The rack is equipped with chrome plated swivel casters with 5" polyolefin wheels, two with wheel brakes. Swivel and axle bearings have seals and zerk grease fittings.

AVAILABLE OPTIONS:

• Stainless Steel watering system with drip troughs
• CPVC watering system with drip troughs
• Stainless Steel casters